Online Data Validation-ODV in Jessor

Our exclusive Online Data Validation (ODV™) eliminates compliance fees with automatic, 100 % barcode validation. Available on the SL/T5000r thermal printer, ODV ensures that all barcodes meet the most stringent scanning standards, reducing unnecessary compliance costs.

With our one and only ODV technology, you can:

• Eliminate chargebacks due to refused or delayed shipments
• Deliver 100% scannable barcodes to your production area every time, automatically
• Eliminate unscannable barcodes from entering into your supply chain distribution system
• Reduce labor costs and downtime with an unattended solution
• Capture and display the raw data within each barcode, to provide further assurance that critical data, such as serialized barcodes, print correctly

Find out how the Printronix ODV solution can make your printing process more efficient and productive.

BARCODES SUPPORTED

• Code 39
• CODABAR
• Interleafed 2 of 5
• Code 93
• Code 128
• UPC/EAN plus add-ons
• PDF417(Limited)
  • Checks linear start and stop bar only

LABEL REQUIREMENTS

• Quiet Zone: Minimum 10 times x-dimension
• Barcodes per line Up to 4 codes on the same horizontal line
• Barcodes per form Up to 99 codes per form
• Barcode orientation Picket fence only
• Horizonal Spacing Minimum of .5” between codes on the same horizontal line
• Barcode Height Minimum bar code height is .13”
• TOF to TOF Minimum Distance .5”

LINEAR BARCODE SPECIFICATIONS

• STANDARD ODV OPTION
  • Scan Width: 4” (200 mm), X-Dimension (min.): 6.6 mil (0.17 mm), Min. Code Height: 0.13”(3.3 mm)
  • Scan Width: 6.5” (165 mm), X-Dimension (min.): 10 mil (0.25 mm), Min. Code Height: 0.14”(3.6 mm)
  • Scan Width: 8.5” (216 mm), X-Dimension (min.): 20 mil (0.51 mm), Min. Code Height: 0.20”(5.1 mm)
• WIDE ODV OPTION
  • Scan Width: 8.5” (216 mm), X-Dimension (min.): 13 mil (0.33 mm), Min. Code Height: 0.20”(5.1 mm)

* Scan width centered around middle of print width. ** Wide ODV available as a special field option only.PRINT RUN REPORT

• Number of forms printed
• Number of bad forms
• Bar width deviation of last bar code
• Number of codes printed
• Average bar width deviation

VALIDATION ERROR ACTIONS

• Retry Form (default), Stop and Retry, Grade and Report, Rescan Form, Rescan and Retry, Rescan and Stop, Overstrike, Stop

VALIDATION ERROR NOTIFICATION MODES

• Printer Display
• Printer Audible Alarm
• Printer Status Light
• Remote Notification

TELEMETRY REPORTS

• Telemetry Path: Network Port
• Data Contents (Selectable)
  • Short: Pass/Fail quality results
  • Validation: Pass/Fail quality results + actual decoded data
  • Full: Validation + all measured parameters

AGENCY CERTIFICATIONS

• cTUVus
• CE
• Class 2 Laser Product
• EN60950-1:2006+A11:2009
• EN60825-1:2007